Buffalo Technology WLM2-G54 Manual de usuario descargar pdf (Pagina 23)

18

4. You will need the Wireless MAC address of

the target WLM2-G54. Enter its MAC

address in the field labeled

"MAC Address of AirStation (Wireless)."

Use the format XX:XX:XX:XX:XX:XX for

the MAC address.

5. Click "Add." Repeat this process for up to

5 additional access points.

6. Once all of the MAC addresses are entered,

repeat this process for each WLM2-G54

you wish to set up for AP-AP communica-

tions. The second WLM2-G54 must have

the MAC address of the first one.

Example: Suppose you wish to set up

three units, #1 as a central unit, with #2

and #3 talking to #1, but not to each

other. AP #1 would have the MAC

addresses of both #2 and #3, as noted

above, but #2 and #3 would only have the

MAC address of #1.

9.10.2 ESS-ID

Allows administrator to alter the ESS-ID of

the AirStation. To communicate with a

specific AP only, the AP’s ESS-ID must be

entered in the client computer. The client

looks only for that specific AP (or ESS-ID) for

wireless communication. Use up to 32

alphanumeric characters for the ESS-ID (case

sensitive). Roaming is possible by setting

identical ESS-IDs and WEP in WLM2-G54s.

9.10.3 DS Channel (Wireless Channel Set)

The channel to be used for wireless commu-

nication. There are 11 channels.

■ Note: This is automatically set in the client

computer.

9.10.4 MAC Restrict

Enable or disable access by MAC address

through the wireless LAN network infrastruc-

ture mode.

9.10.5 EAP

Configure EAP authentication process.

Figure 9.11 Link Integrity Settings

Figure 9.10 Wireless

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 35 36

Comentarios a estos manuales

Sin comentarios